2026 Connecticut Fence Installation Pricing Guide

Real installed price ranges for Hartford County fence projects — per linear foot, per typical project, and the extras that actually move the number.

Cost per linear foot, installed

These are 2026 installed ranges — materials, labor, posts, and concrete — for a standard residential job on workable ground. They are planning figures, not quotes; your contractor's written estimate is the number that counts.

MaterialInstalled per linear footTypical 150-foot backyardLifespan
Chain-link (galvanized)$15–$30$2,250–$4,50020+ years
Wood, pressure-treated pine$25–$45$3,750–$6,75015–20 years with staining
Wood, cedar$30–$55$4,500–$8,25020–25 years with staining
Vinyl / PVC privacy$30–$60$4,500–$9,00025+ years
Aluminum / ornamental$25–$55$3,750–$8,25025+ years
Wrought iron$40–$75$6,000–$11,25050+ years with rust care

What a typical job costs all-in

For a typical 150-linear-foot backyard fence with one walk gate, most Hartford County homeowners land between $3,000 and $9,000 depending on material. The national average for a fence installation sits around $3,300, with most projects between roughly $1,900 and $4,800 — but that average skews toward smaller chain-link and pine jobs. A full vinyl privacy fence on a larger lot, or an ornamental aluminum fence with multiple gates, lands well above it. Treat any quote far below these ranges as a question, not a bargain: the savings usually come out of post depth, concrete, or panel quality.

The extras that move the price

  • Gates: $300–$2,000 each. A basic walk gate is the low end; a wide drive gate with hardware and automation is the high end.
  • Old fence removal and disposal: typically $3–$8 per linear foot, more if concrete footings have to come out.
  • Sloped lots: stepped or racked panels, longer posts, and more labor — expect 10–25% over a flat-lot price.
  • Ledge and hard digging: rock near the surface can add hundreds in labor or equipment, and occasionally forces a post-layout change.
  • Permits and surveys: permit fees vary by town; a new survey, if you don't have one on file, is a separate cost worth every dollar when the line is uncertain.
  • Height: an 8-foot fence runs roughly 25–40% more per foot than a 6-foot fence in the same material.

How to use these numbers

Measure your fence line roughly, multiply by the per-foot range for your material, add gates and removal, and you have a sanity range before anyone visits. Then get two or three written quotes and compare them line by line — material, post depth, gate count, removal, permits — not just the bottom line. The cheapest quote that skips post depth or concrete is the most expensive fence you will buy.

Get a free fence quote. Request your free quote →

Get a Free Fence Quote

Two minutes. Matched with a local fence contractor. Free written estimate, no obligation.

Get My Free Quote